Pedestal Eye Wash Stations

Pedestal Eye Wash Stations

WALL-MOUNTED EYE WASH WG7022Y

PRODUCT CHARACTERISTICS

  • Materials: ABS plastic + 304 stainless steel.
  • Main pipe fittings adopt stainless steel with good oil resistance, acid proof, alkali prevention and saline solution performances.
  • Push handle: easy operation.
  • Living water applies.
  • It is convenient for emergency use, can effectively save space and is widely applicable.
  • It complies with regulations of ANSI/ISES on emergency eye wash station and showering equipment – ANSI Z358.1-2012.

PRODUCT SPECIFICATION

Materials description:

  • Pipe: 304 series of stainless steel
  • Water basin: ABS plastic, fixed support baking varnish galvanized steel. Equipped with pneumatic spray nozzle and continuous opening ball valve controlled by paddle-type handle.
  • Water bowl: ABS plastic 320x95 (diameter, height/mm)
  • Spray head: 304 series of stainless steel (with dust cover, green ABS plastic eye/face wash, nozzle, with self-dosing nozzle protection cover, reducing pollution probability.
  • Valve: ½ inch female thread. Flow rate: up to 15.2 L/min under 2.1 kgf/cm2 pressure (delivers 60 gallons of water within 15min)
  • Weight: 2Kg
  • Package: Carton 30x83x35 (HxLxW/cm)

Eye wash pedestals from DRIZIT

PEDESTAL-MOUNTED EYE WASH WG7032FY

PRODUCT CHARACTERISTICS

  • Materials: ABS plastic + stainless steel.
  • Main pipe fittings adopt stainless steel materials.
  • Push handle and pedal switches are at your option for flexible control of switch and easy operation.
  • Living water applies.
  • It applies for work places without walls for installation.
  • The inlet of vertical eye wash station is 835mm from the ground.
  • The outlet of eye wash station is 210mm from the ground.

PRODUCT SPECIFICATION

Materials description:

  • Main pipe fittings: 304 series of stainless steel
  • Water basin: ABS plastic; vertical column pipe: baking varnish galvanized steel
  • Base: aluminum casting Equipped with pneumatic spray nozzle and continuous opening ball valve controlled by paddle type handle.
  • Spray head: 304 series of stainless steel, with dust cover, green ABS plastic eye/face wash nozzle, with self-closing nozzle protection cover, reducing pollution probability. The spraying header is 100cm from the ground.
  • Valve: 1/2 inch female thread, stainless steel materials
  • Initiating device: stainless steel portable handle
  • Inlet: 1/2 inch female thread
  • Discharge: 1 inch female thread
  • Column pipe: 1+ 1/4 inch baking varnish galvanizing tube
  • Flow rate: up to 15.2L/min under 2.1kgf/cm2 pressure (delivers 60 gallons of water within 15min.)
  • Weight: 3.95Kg
  • Package: carton 30x83x35 (HxLxW/cm)
Drizit - Ready for your next spill clean-up!